L500

Advantages at a glance

  • Landing gear that can be used universally
  • Patented drive on the inside
  • Accessories and spare parts are usually compatible with the Modul B series
  • All three plate positions are available
  • All commonly-used mounting heights
  • S-, A- and T foot

Technical Specification

S foot

Order No. M (mm) H (mm) G (mm) Back plate
L500S700-1 700.0 350.0 430.0 upper
L500S700-2* 700.0 350.0 - lower
L500S700-3* 700.0 350.0 - double
L500S750-1 750.0 400.0 480.0 upper
L500S750-2* 750.0 400.0 - lower
L500S750-3* 750.0 400.0 - double
L500S800-1 800.0 450.0 530.0 upper
L500S800-2* 800.0 450.0 - lower
L500S800-3 800.0 450.0 530.0 double
L500S850-1 850.0 500.0 580.0 upper
L500S850-2 850.0 500.0 580.0 lower
L500S850-3 850.0 500.0 580.0 double

A foot

Order No. M (mm) H (mm) G (mm) Back plate
L500A700-1 700.0 350.0 430.0 upper
L500A700-2 700.0 350.0 - lower
L500A700-3 700.0 350.0 - double
L500A750-1 750.0 400.0 480.0 upper
L500A750-2 750.0 400.0 - lower
L500A750-3 750.0 400.0 - double
L500A800-1 800.0 450.0 530.0 upper
L500A800-2 800.0 450.0 530.0 lower
L500A800-3 800.0 450.0 530.0 fdouble
L500A850-1 850.0 500.0 580.0 upper
L500A850-2 850.0 500.0 580.0 lower
L500A850-3 850.0 500.0 580.0 double

T foot

Order No. M (mm) H (mm) G (mm) Back plate
L500T700-1 690.0 350.0 430.0 upper
L500T700-2* 690.0 350.0 - lower
L500T700-3* 690.0 350.0 - double
L500T750-1 740.0 400.0 480.0 upper
L500T750-2* 740.0 400.0 - lower
L500T750-3* 740.0 400.0 - double
L500T800-1 790.0 450.0 530.0 upper
L500T800-2 790.0 450.0 530.0 lower
L500T800-3 790.0 450.0 530.0 double
L500T850-1 840.0 500.0 580.0 upper
L500T850-2 840.0 500.0 580.0 lower
L500T850-3 840.0 500.0 580.0 double

* No screw-on bracket is included in delivery. Loose screw-on brackets can be ordered as accessories

Technical Data (per set)

Characteristic Value
Lifting capacity 24 t
Static load 50 t
Lift per turn of handle  
• Low gear 0,9 mm
• High gear 15,0 mm
Crank force at 16 t lifting capacity 210 N

Remarks

Please order cranks and connection shafts separately (same as in the Ordering System Module); show to general informaton

Dimensions A, B and C, see general information.