Modul B

Advantages at a glance

  • Very versatile use
  • Significant gain in lifting force
  • Modular system and extensive spare parts catalogue

    Technical features

    • Six mounting heights
    • Easy-to-assemble and easy-to-replace foot system with four different foot types
    • S foot with the longest drift (±140 mm) and largest footprint
    • Additional reinforcements for lateral-force resistance
    • 3 plate positions (high, low, double)
    • Also available with two side operation and special crank

      Technical Specification

      Technical Data (per set)

      Characteristic Value
      Lifting capacity 24 t
      Static load 50 t
      Lift per turn of handle  
      - Low gear 0,9 mm
      - High gear 15,0 mm
      Crank force per crank at 16 t lifiting capacity 110 N

       

      Note: The drift for the S and A feet is ±140 mm.

      Dimensions A, B, C and E, see General information.

      Components and order numbers

      * no bracing bracket are supplied for the combination of mounting heights 04, 05, 06, 24 with back plate 02, 03.See accessories for loose bracing bracket.

      ** can be used without restriction on Modul legs produced after week 22/02. On Modul legs produced before that the angle ofmovement is reduced by ± 10°.


      Note: Landing gear with foot “R” (Wheels) please refer to Opens internal link in current windowMODUL CW

      Individual components

      The module components U (crank with crank parking hook) and L (connection shaft) must be ordered separately and are available individually. The type of feet D are likewise available separately.

      Modul B Order key

      Modul B – components and foot versions

      Example of an order number for one set

      The complete order number to order the Modul is made up of the order numbers of the various components. First choose the individual components. Each component has a 2-figure order number. List all the components (in other words all the order numbers) in sequence.

      Example of an order number for a single leg

      If you order a single leg the connection shaft will not be supplied. In this case enter 00 at U and at L an R for right (crank side) or an L for left. 

      Modul B

      Spare Parts

      Item Description Remark Order No. per set
      1 Cover with bolts JS E0046100 2
      3 see individual components   -
      4 Bevel gear with bolt from 020719/0126097 JS E0058600 2
      5 Shaft JS E0001500 1
      6 Bearing compl. JS E0046200 1
      7 Bearing JS E0001800 1
      8 Shaft with bearing a JS E0058700 1
      9 Grease tank a JS E0002000 1
      10 Gear a JS E0055800 1
      11 Crank shaft compl. JS E0046500 1
      12 Bearing holder compl., a JS E0058800 1
      13 Crank shaft and Bearing holder compl. with 11 + 12, a JS E0056600 1
      14 Drive compl. with 08, 10 + 13, a, c JS E0083700 1
      15 Bolts, washers, nuts JS E0043100 1
      16 see individual components   -
      17 Crank bushing JS E0042700 1
      18 Crank parking hook for crank 350 mm (JS U01), b JS E0040200 1
      18 Crank parking hook for crank 415-480 mm (JS U02-JS U04), b JS E0040201 1
      18 Crank parking hook for crank 520-620 mm(JS U05-JS U08), b JS E0040202 1
      19 Mh-04/750 shaft left Double plate JS E0030803 1
      19 Mh-03/800 shaft left Double plate JS E0030802 1
      19 Mh-02/850 shaft left Double plate JS E0030801 1
      19 Mh-01/900 shaft left Double plate JS E0030800 1
      19 Mh-06/650 shaft left Plate A, bottom JS E0031305 1
      19 Mh-05/700 shaft left Plate A, bottom JS E0031304 1
      19 Mh-04/750 shaft left Plate A, bottom JS E0031303 1
      19 Mh-03/800 shaft left Plate A, bottom JS E0031302 1
      19 Mh-02/850 shaft left Plate A, bottom JS E0031301 1
      19 Mh-01/900 shaft left Plate A, bottom JS E0031300 1
      19 Mh-05/700 shaft left Double plate JS E0030804 1
      19 Mh-06/650 shaft left Double plate JS E0030805 1
      19 Mh-06/650 shaft left Plate A, top JS E0031805 1
      19 Mh-05/700 shaft left Plate A, top JS E0031804 1
      19 Mh-04/750 shaft left Plate A, top JS E0031803 1
      19 Mh-03/800 shaft left Plate A, top JS E0031802 1
      19 Mh-02/850 shaft left Plate A, top JS E0031801 1
      19 Mh-01/900 shaft left A-Platte oben JS E0031800 1
      20 Mh-06/650 shaft right Plate A, bottom JS E0029705 1
      20 Mh-01/900 shaft right Plate A, top JS E0028600 1
      20 Mh-05/700 shaft right Plate A, bottom JS E0029704 1
      20 Mh-04/750 shaft right Plate A, bottom JS E0029703 1
      20 Mh-03/800 shaft right Plate A, bottom JS E0029702 1
      20 Mh-02/850 shaft right Plate A, bottom JS E0029701 1
      20 Mh-01/900 shaft right Plate A, bottom JS E0029700 1
      20 Mh-06/650 shaft right Plate A, top JS E0028605 1
      20 Mh-05/700 shaft right Plate A, top JS E0028604 1
      20 Mh-04/750 shaft right Plate A, top JS E0028603 1
      20 Mh-03/800 shaft right Plate A, top JS E0028602 1
      20 Mh-02/850 shaft right Plate A, top JS E0028601 1
      20 Mh-01/900 shaft right Double plate JS E0029200 1
      20 Mh-06/650 shaft right Double plate JS E0029205 1
      20 Mh-05/700 shaft right Double plate JS E0029204 1
      20 Mh-04/750 shaft right Double plate JS E0029203 1
      20 Mh-03/800 shaft right Double plate JS E0029202 1
      20 Mh-02/850 shaft right Double plate JS E0029201 1
      21 Axial bearing JS E0066401 2
      22 Mh-05/700 inner tube l. + spindle with 21 + 04 JS E0056405 1
      22 Mh-04/750 inner tube l. + spindle with 21 + 04 JS E0056404 1
      22 Mh-03/800 inner tube l. + spindle with 21 + 04 JS E0056403 1
      22 Mh-02/850 inner tube l. + spindle with 21 + 04 JS E0056402 1
      22 Mh-01/900 inner tube l. + spindle with 21 + 04 JS E0056401 1
      22 Mh-06/650 inner tube l. + spindle with 21 + 04 JS E0056406 1
      23 Mh-01/900 inner tube r. + spindle with 21, 07 + 04 JS E0056201 1
      23 Mh-02/850 inner tube r. + spindle with 21, 07 + 04 JS E0056202 1
      23 Mh-06/650 inner tube r. + spindle with 21, 07 + 04 JS E0056206 1
      23 Mh-05/700 inner tube r. + spindle with 21, 07 + 04 JS E0056205 1
      23 Mh-04/750 inner tube r. + spindle with 21, 07 + 04 JS E0056204 1
      23 Mh-03/800 inner tube r. + spindle with 21, 07 + 04 JS E0056203 1
      24 Nut and bolt*** JS E1043300 2
      25 Bolt JS E0055300 4
      26 Spring JS E0012900 4
      27 S-Foot compl. with 24 + 26**** JS D01 2
      28 A-Foot compl. with 24**** JS D02 2
      29 T-Foot compl. with 24**** JS D04 2
      30 TC-Foot* compl. with 24*+**** JS D06 2
      31 R foot** compl. with 24, 32 + 33* JS D03 2
      32 Wheels with split pins Standard JS E0062200 2
      33 Wheel holder** JS E0067300 2
      34 Clamp with angle with 35, 36, 37 JS E010.010 2
      35 Angle JS E010.001 2
      36 Clamp JS E010.002 2
      37 Nut and bolt JS E020.004 2

       

      a    from 020121/0009246
      b    Crank kit see General Information
      c    also module 2000 (replacement for JS E0059200)
      *     With the 06/TC foot version, item 30, the installation height Mh is reduced by 50 mm
      *     With the 03/roller foot version, item 31, the installation height Mh is increased by 43 mm  
      **     31, 32, 33: only for landing gears up to September 2009 (up to 091009 131204)
      ***     Nut and bolt up to September 2009 Order No. JS E1043300 (4 per Kit)
      ***     Nut and bolt from September 2009 Order No. JS E1043300 (2 per Kit)
      ****     Only one fitting included in scope of delivery
      *****
          Replaces version with washer


      Note on the new foot mounting
      Since September 2009, module B has a new foot mounting which is only screwed on one side. On NO account must the wheel holder be attached with this execution of leg!

      Individual components

      Item Description Remark Order No. per set
      3 Connection shaft 1340 mm JS L01 1
      3 Connection shaft 1450 mm JS L02 1
      3 Connection shaft 1470 mm JS L03 1
      3 Connection shaft 1500 mm JS L04 1
      3 Connection shaft 1505 mm JS L05 1
      3 Connection shaft 1575 mm JS L06 1
      3 Connection shaft 1605 mm JS L07 1
      3 Connection shaft 1635 mm JS L08 1
      3 Connection shaft 1700 mm JS L09 1
      3 Connection shaft 1790 mm JS L10 1
      16 Crank 350 mm w. parking hook with 15, 17 + 18 JS U01 1
      16 Crank 415 mm w. parking hook with 15, 17 + 18 JS U02 1
      16 Crank 450 mm w. parking hook with 15, 17 + 18 JS U03 1
      16 Crank 480 mm w. parking hook with 15, 17 + 18 JS U04 1
      16 Crank 520 mm w. parking hook with 15, 17 + 18 JS U05 1
      16 Crank 570 mm w. parking hook with 15, 17 + 18 JS U07 1
      16 Crank 620 mm w. parking hook with 15, 17 + 18 JS U08 1

      MODUL B

      MODUL B

      PDF-Downloads


      Mounting and Operating Instructions
      Modul Landing gear 04/2019
       
      Flyer
      MODUL B Order System for Dealers with Comparison List 04/2019