JSK SL

Advantages at a glance

  • Low weight
  • Suitable for all standard hole pattern types
  • Optimum protection against corrosion thanks to E-coating

    Comment

    • The JSK SL is not suitable for use in site traffic.
    • The load conditions apply for operation on paved roads and transport conditions typical in Central Europe.
    • Please enquire about uses other than these.

    V = Sliding distance

    Technical Data

    Typ D value (kN) Imposed load U (t) Approval (ECE SL)
    JSK SL 152.0 20.0 E1 55R-01 1151

    Technical Specification

    Suitable for 2“ king pins (G 50) as per ECE R55-01, DIN 74080, ISO 337 and steering wedges as per ECE R55-01, DIN 74085.

    JSK SL

    Spare Parts

    Item Description Remark Order No. per set
    01 Fifth wheel coupling *   1
    02 Split pin for JSK SLEOxxxxxx SK 3121-61 1
    02 Split pin for JSK SLDOxxxxxx SK 2921-051 1
    05 Split pin, kit   SLE202210020 1
    06 Bracing, kit   SLE202120020 1
    07 Stopper, kit with 11 SLE202520020 2
    08 Lever, kit   SLE202300020 1
    09 Cylinder, kit for pneumatic version SLE202410020 1
    10 Pneumatics kit for pneumatic version V 1021-54 1
    11 Pressure spring   SLE201330020 2
    13 Double tension spring   SLE202610000 1
    14 Traverse, kit   SLE201380020 2
    14 Reinforced traverse, kit Scania   SLE201380320 2
    oZ Handle, kit BH 173 for manual version SLE202420020 1
    oZ Handle, kit BH 203 for manual version SLE202850020 1
    oZ Handle, kit BH 220 for manual version SLE202850020 1
    oZ Handle, kit BH 263 for manual version SLE202720020 1
    16 Bridge, kit for manual version SLE202770020 1
    16 Bridge, kit for pneumatic version SLE203300020 1
    17 Cable tie for JSKSLxxxxV2xx NTE004050000 7
    18 Sensor kit for JSKSLxxxxV2xx SKE002331100 1
    19 Coiled cable for JSKSLxxxxV2xx SLE203780000 1
    20 Plug holder, Bearing plate kit for JSKSLxxxxV2xx SLE203790000 1
    21 Plug holder, traverse, kit for JSKSLxxxxV2xx SLE203930000 1


    * Spare parts of fifth wheel coupling see JSK 37 E or JSK 36 D
    The gear racks and the fifth wheel plate are not available as spare parts.

    JSK SL Order key

    Components and variants

    Fifth wheel coupling JSK SL Mounting height Variants Handle/Maintenance Customer hole pattern (all KTL)
    D0 = JSK 36 D (pressed steel) 32 = 173 mm 06 = Slider manual AA = Standard (without hole pattern, no customer-specific pattern)
    E0 = JSK 37 E (cast) 45 = 203 mm 07 = Slider manual / JSK 37 EW CT = Iveco hole pattern 860 / M16
      73 = 263 mm T6 = Slider manual / JSK 37 EW / LT1P DR = DAF hole pattern 880 / M16 / 150 / 100 / 200
        D6 = Slider manual/ JSK 36 D + 3 sensors* FV = Iveco hole pattern 920 / M16
        20 = Slider pneumatic CK = MAN hole pattern 880 / M16
        21 = Slider pneumatic / JSK 37 EW CN = RVI hole pattern 900 / M16
        I3 = Slider pneumatic / JSK 37 EW / LT1P DV = RVI hole pattern 940 / M16
        D5 = Slider pneumatic / JSK 36 D + 3 sensors EC/GA = Scania hole pattern*** 880 / M18 / reinforced traverse
        V2 = Slider pneumatic / JSK 37 E / 1 Sensor on Slider** BC/GC = Scania hole pattern 880 / M18
        X6 = XXL Slider manual BD = Volvo hole pattern 930 / M12
        X4 = XXL Slider manual / JSK 37 EW / LT1P DF = JOST hole pattern XXL Slider 880 / M16
        X8 = XXL Slider pneumatic  
        X5 = XXL Slider pneumatic / JSK 37 EW / LT1P  

    * = remote display and cable set have to be ordered seperatly
    ** = only availiabe in mounting heights 173 mm and 203 mm with customer hole pattern type GA / GC
    *** = reinforced traverse only possible with elevated mounting angle

    XXL-Slider only with “AA” or “DF” hole pattern

    Explanations

    JSK 37 EW = Low-maintenance version with plastic top plate liner
    LT1P = LubeTronic 1Point

    Example of an order number – JSK SL DO 32 06 AA

    Remote display

    Order No. Description Weight (kg)
    SKE501620200 3-sensor display, 24 V (european Standard) 0,075
    SKE501620500 3-sensor display, 12 V 0,075

    Cable set

    Order No. Description Weight (kg)
    SKE002110200 ADR (for hazardous materials transporter) 1,85

    Fleetmaster Handle

    Order No. Description Weight (kg)
    SKE070616469 complete for slider manual 2,00
    SKE070616416 complete for slider pneumatic 2,00

    Mounting kits

    Customer hole pattern Order No. Quantity per SL
    CT/FV SLE000000120 1
    CK SLE000000120 1
    CN/DV SLE000000120 1
    BP SLE000000120 1
    CP/DR SLE000000120 1
    DF SLE000000120 2
    BD SLE000000320 1
    EC/BC SLE000000220 1
    CB SLE000000720 1


    available with 

    Delivery time on request (not all combinations are possible)

    Customer hole pattern


    JSK SL

    PDF-Downloads


    Mounting and Operating Instructions
    JSK SL 07/2017
     
    Flyer
    JSK SL The new slider 04/2008
    Original spare parts Better safe than sorry! 09/2014
    Original spare parts Better safe than sorry! 09/2016
    Sales Information MAN 08/2018
    Sales Information Renault 08/2018
    Sales Information SCANIA 08/2018
    Sales information DAF 08/2018
    Wear Limit Gauges 08/2016