Advantages at a glance

  • Sensors provide best possible safety during the coupling process
  • Increased safety even in poor visibility
  • A remote display processes the signal and displays it in the driver’s cab

    Technical Features

    • A sensor permanently monitors the connection status
    • Second sensor controls the position of the king pin
    • An additional third sensor monitors the contact with the skid plate and increases safety and convenience during the coupling process.
    • The sensors are located in protected zones on non-moving parts
    • Electromagnetical compatibility according to highest standards
    • Also suitable for use in the transport of dangerous goods (ADR)

      A = sensor for connection status
      B = sensor for king pin
      C = sensor for coupling height

      Selection table / Versions available Plate coupling

      Order No. H (mm) D value (kN) Imposed load U(t) Weight (kg) Customer hole pattern Approval (ECE) ZL WA Version
      JSK 36 DV 20 C6 AA 150.0 152.0 20 126.0 DIN E1 55R-01 0301 J M Standard
      JSK 36 DV 31 C6 AA 150.0 152.0 20 128.0 DIN E1 55R-01 0301 J M Standard
      JSK 36 DV 38 C6 AA 172.0 152.0 20 130.0 DIN E1 55R-01 0301 J M Standard
      JSK 36 DV 47 C6 AA 172.0 152.0 20 135.0 DIN E1 55R-01 0301 J M Standard

      * Sensor couplings in the standard version JSK 36, JSK 37 and JSK 42 are complete sets, which means that remote display (SKE501620200) and cable set (SKE002110300) are included in the delivery.

      Note: Couplings – other models are available on request

      For using sensor coupling versions MB, RT and VT, the truck has to be prepared ex factory for sensors by the manufacturer.

      Technical Specification

      Sensor coupling system in accordance with the ECE R55-01, TÜ.EGG.095-05, DIN 74081, ISO 3842, ECE R10 directives/standards. Suited for picking up 2” kingpins (class G50) in accordance with ECE R55-01, DIN 74080, ISO 337 and steering wedges in accordance with ECE R55-01, DIN 74085.


      WA / Maintenance
      W = Low-maintenance version
      M = Manual lubrication
      Z = Prepared for central lubrication
      LT1P = LubeTronic 1Point

      ZL / Handle length
      J = Long handle

      Also available for additional models in the JSK 36 • JSK 37 • JSK 40 • JSK 42 series

      JSK 36 - Plate coupling

      Repair and retrofit kits

      Item Description Remark Order No. per sensor coupling
      01 Latch with locking magnet with 06 SKE002905104 1
      02 Retaining plate for king pin sensor   SKE002905130 1
      03 Retaining plate for trailer sensor with 08 SKE003220100 1
      04 Retaining plate for pin housing JSK 36 with 09 SKE004650000 1
      05 3-sensor cable harness with retaining plate for locking sensor JSK 36 with 06, 07, 08, 09, 10 SKE002040400 1
      11 Sensor display with 3 sensors – 24 V (European standard)   SKE501620200 1
      11 Sensor display with 3 sensors – 12 V   SKE501620500 1
      12 Connection cable, ADR quality (7-pole round plug) oZ SKE002110200 1
      12 Connection cable, ADR quality (7-pole angular plug) – new oZ SKE002110300 1
      13 Adapter cable (pole round plug vs pole angular plug) oZ SKE011300000 1

      Standard fifth wheel couplings can not be retrofitted with sensors

      JSK 36 - Plate coupling

      Safe solution with remote display



      Mounting and Operating Instructions
      Sensor coupling 05/2018
      Repairkits Original spare parts 05/2016
      Repairkits Original spare parts 09/2016
      Sensor coupling 3-Sensor version 09/2016