JSK 42

Advantages at a glance

  • Sensors provide best possible safety during the coupling process
  • Increased safety even in poor visibility
  • A remote display processes the signal and displays it in the driver’s cab

Technical Features

  • A sensor permanently monitors the connection status
  • Second sensor controls the position of the king pin
  • An additional third sensor monitors the contact with the skid plate and increases safety and convenience during the coupling process.
  • The sensors are located in protected zones on non-moving parts
  • Electromagnetical compatibility according to highest standards
  • Also suitable for use in the transport of dangerous goods (ADR)

    A = sensor for connection status
    B = sensor for king pin
    C = sensor for coupling height

    Selection table / Versions available Cast coupling

    Order No. H (mm) D value (kN) Imposed load U(t) Weight (kg) Customer hole pattern Approval (ECE) ZL WA Version
    JSK 42 K0 20 C6 AA 150 152 20 130 DIN E1 55R-01 1245 J Z Standard*
    JSK 42 K0 20 C7 AA 150 152 20 130 DIN E1 55R-01 1245 J W Standard*
    JSK 42 K0 38 C6 AA 185 152 20 128 DIN E1 55R-01 1245 J Z Standard*
    JSK 42 K0 38 C7 AA 185 152 20 128 DIN E1 55R-01 1245 J W Standard*
    JSK 42 K0 20 M3 BB 150 152 20 130 DIN E1 55R-01 1245 J Z Mercedes-Benz
    JSK 42 K0 20 BC AA 150 152 20 130 DIN E1 55R-01 1245 J W+LT1P Mercedes-Benz
    JSK 42 K0 38 M3 BB 185 152 20 128 DIN E1 55R-01 1245 J Z Mercedes-Benz
    JSK 42 K0 38 BC AA 185 152 20 128 DIN E1 55R-01 1245 J W+LT1P Mercedes-Benz
    JSK 42 K0 20 P1 AI 150 152 20 130 DIN E1 55R-01 1245 K Z Volvo/Renault
    JSK 42 K0 20 P4 AI 150 152 20 130 DIN E1 55R-01 1245 K W+LT1P Volvo/Renault
    JSK 42 K0 38 P1 AI 185 152 20 128 DIN E1 55R-01 1245 K Z Volvo/Renault
    JSK 42 K0 38 P4 AI 185 152 20 128 DIN E1 55R-01 1245 K W Volvo/Renault

    available with

    * Sensor couplings in the standard version JSK 36, JSK 37 and JSK 42 are complete sets, which means that remote display (SKE501620200) and cable set (SKE002110300) are included in the delivery.

     

    For using sensor coupling versions MB, RT and VT, the truck has to be prepared ex factory for sensors by the manufacturer.

    Technical Specification

    Sensor coupling system in accordance with the ECE R55-01, TÜ.EGG.095-05, DIN 74081, ISO 3842, ECE R10 directives/standards. Suited for picking up 2” king pins (class G50) in accordance with ECE R55-01, DIN 74080, ISO 337 and steering wedges in accordance with ECE R55-01, DIN 74085.

    Explanations:

    WA / Maintenance
    W = Low-maintenance version
    M = Manual lubrication
    Z  = Prepared for central lubrication
    LT1P = LubeTronic 1Point

    ZL / Handle length
    J = Long handle
    K = Short handle


    Also available for additional models in the JSK 36 • JSK 37 • JSK 40 • JSK 42 series

    JSK 42 - Cast coupling

    Repair and retrofit kits

    Item Description Remark Order No. per set
    01 Lever with magnet SKE001360600 1
    02 Trailer sensor retaining plate with mounting parts with 06 SKE003220100 1
    03 3-sensor cable harness with mounted retaining plate – Standard / Mercedes-Benz* with 04, 05, 06 SKE006140001 1
    03 3-sensor cable harness with mounted retaining plate – Volvo with 04, 05, 06 SKE006350010 1
    03 2-sensor cable harness with mounted retaining plate – Standard with 04, 05 SKE002040300 1
    07 Guide plate with mounting elements oZ SKE006150000 1
    09 Sensor display with 3 sensors – 24 V (European standard) SKE501620200 1
    09 Sensor display with 3 sensors – 12 V SKE501620500 1
    11 Connection cable, ADR quality (7-pole angular plug) – new oZ SKE002110300 1
    11 Connection cable, ADR quality (7-pole round plug) oZ SKE002110200 1
    12 Adapter cable (pole round plug vs pole angular plug) oZ SKE011300000 1
    13 Single trailer plate sensor – Standard / Mercedes-Benz with 02, 06, 08 SKE117962100 1
    14 Single king pin sensor – Standard / Mercedes-Benz SKE117947900 1
    15 Single locking mechanism sensor – Standard / Mercedes-Benz SKE117947800 1

    Standard fifth wheel couplings can not be retrofitted with sensors

    * Applicable for JSK 42 W from serial serial number 22E403xxxx or 1xxxxxxxE4 (from KW 03/2012)
    Applicable for JSK 42 from serial number 22E423xxxx or 1xxxxxxxE4 (from KW 23/2012)
    Applicable for all JSK 40 K9


    Sensorkupplung JSK 42 - Gusskupplung

    Sensorsattelkupplung JSK 42

    JSK 42 - Cast coupling

    Safe solution with remote display

     

    PDF-Downloads


    Mounting and Operating Instructions
    Sensor coupling 05/2018
     
    Repair kits
    Replacing the sensor set JSK 37/JSK 40/JSK 42 06/2013
    Replacing the sensor set (MB) JSK 37/JSK 40/JSK 42 06/2013
     
    Flyer
    Repairkits Original spare parts 08/2016